2000 SERIE MOYNO PUMPS

Moyno 2000 pumps set the standard in positive displacement pumping applications with the short. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life.

These rugged pumps are able to handle abrasive materials in excess of 80% solids and offer a performance range to 4,500 GPM with pressure to 1,500 PSI.

 MOYNO 2000WA – Close Coupled Design

The 2000WA close coupled pump is specifically designed for lower pressure, lower flow applications that do not require the full features and benefits of the 2000G1 pump. The 2000WA features a close coupled design that has integral bearings that support the radial thrust loads that can be seen at the rotor/stator. This design reduces the overall stress that can occur in the gear reducer.

The 2000WA is specifically designed for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is desired.

Features and Benefits

• Close coupled bearing housing design
• Bearings integral to adapter housing
• Uses standard size / keyed gear reducer shaft
• Sealed gear-type universal joint drive train

Typical Applications

• Municipal Wastewater Treatment
• Pulp and Paper
• Oil and Gas
• Food Waste
• Petrochemical

MOYNO 2000 WB – CLOSE COUPLED DESIGN

The 2000WB close coupled pump is specifically designed for lower pressure, lower flow applications that do not require the full features and benefits of the Moyno 2000 G1 pump. The 2000WB model features a traditional close coupled design where the loads are supported by the gear reducer bearings. This design reduces the overall stress that can occur in the gear reducer.

The 2000WB is specifically designed for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is desired.

Features and Benefits

• Traditional close coupled design
• No shaft bearings
• Thrust and radial loads supported by the bearings in the gear reducer

Typical Applications

• Municipal Wastewater Treatment
• Pulp and Paper
• Oil and Gas
• Food Waste
• Petrochemical

MOYNO G1 – FLANGED DESIGN

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Broad range of viscosities and solids

Fluid Supply

Via standard pipe

Benefits

Best value for majority of applications

Typical Applications

• Oil
• Polymers
• Municipal sludge to 10% solids
• Titanium Dioxide
• Paper coatings
• Mining Slurries

MOYNO G2 – SINGLE AUGER FEED

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Viscosity and solids where open inlet is required

Fluid Supply

• Via wide open-throats and chutes
• Capable of varying length to match wide feed areas from centrifuges and 1, 1.5, and 2-meter length belt filter presses

Benefits

• Single auger feed mechanism to stuff product into the pump elements for increased fill efficiency
• Wide open-throat minimizes plugging that could occur in a standard inlet

Typical Applications

• Heavy clay slurries
• Gypsum
• Grout
• Grape must
• Municipal GBT sludge
• Municipal sludge to 15% solids
• Thick industrial sludges

MOYNO G3 – BRIDGE BREAKER

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Medium- to high-viscosity and solids where product bridging is a concern

Fluid Supply

• Via wide open-throats and chutes
• Capable of varying length to match wide feed areas from centrifuges and 1, 1.5, and 2-meter length belt filter presses

Benefits

• Independently driven Moyno bridge breaker has the flexibility to operate at different RPM from the pump
• Single auger feed mechanism to stuff product into the pump elements for increased fill efficiency
• Wide open-throat minimizes plugging that could occur in a standard inlet

Typical Applications

• Pharmaceutical pastes
• Heavy petroleum sludges
• Plasticizers
• Municipal sludge in excess of 30% solids
• Paper stock in excess of 12% solids

MOYNO G4 – 45 INLET DESIGN

The high-efficiency G4 progressing cavity pump’s 45°inlet lowers friction loss and provides for gentler handling of the product.

Fluid Type

High solids

Benefits

• Universal joint that is out of the fluid flow path for unobstructed flow to the pump cavity inlet
• Lower overall system pressure
• Constant, non-pulsating flow imparts less stress on piping machinery and drive systems
• Patented auger feed on the rotor head smoothly stuffs product directly into the cavity without obstruction
• Rotor configuration is designed to enhance flow of high solids content materials and optimize volumetric efficiency

Typical Applications

• Pharmaceutical pastes
• Heavy petroleum sludges
• Plasticizers
• Municipal sludge in excess of 30% solids
• Paper stock in excess of 12% solids